AQ-P100 SeriesHypochlorous acid generator
Compare AQ-P100 and AQ-P100-4G for compact on-site HOCl generation. Both provide 60–120 L/h and 10–80 ppm available chlorine; cabinet dimensions, electrolyte reservoir and remote-control options distinguish the models.

The figures behind the fit.
Compare the operating point.
Flow, chlorine concentration and water conditions belong in the same discussion. The upper limits shown here are not a guaranteed simultaneous output.
| Parameter | Listed value |
|---|---|
| Solution output | 60–120 L/h |
| Available chlorine (FAC) | 10–80 ppm |
| pH reference range | 5.0–6.5* |
| Electrical supply | 220 V AC · 50 Hz |
| Rated power | 170 W |
| Inlet water pressure | 0.15–0.25 MPa |
| Electrolyte reservoir | 1,000 mL |
| Cabinet dimensions | 500 × 380 × 190 mm |
| Electrode material | Ruthenium–iridium coated titanium |
| Remote control | Optional 4G configuration |
| Primary disinfecting factor | HClO |
| Electrolytic cell service life | ≥5,000 h |
| Parameter | Listed value |
|---|---|
| Solution output | 60–120 L/h |
| Available chlorine (FAC) | 10–80 ppm |
| pH reference range | 5.0–6.5* |
| Primary disinfecting factor | HClO |
| Electrical supply | 220 V AC · 50 Hz |
| Rated power | 170 W |
| Electrolytic cell service life | ≥5,000 h |
| Inlet water pressure | 0.15–0.25 MPa |
| Electrolyte reservoir | 500 mL |
| Cabinet dimensions | 300 × 200 × 460 mm |
| Electrode material | Ruthenium–iridium coated titanium |
Make room for a complete installation.
Plan the space around the cabinet.
Allow for mounting, feed handling and access to connections. Cabinet dimensions alone do not define the installation footprint.
-
Water supply
Share a water analysis and inlet pressure. Confirm any pretreatment needed.
-
Power & connections
Check local voltage and frequency, grounding, and the proposed connection sizes.
-
Feed & service access
Provide appropriate electrolyte storage and safe access for replenishment and maintenance.
A compact format, in a real setting.

See the equipment in context.
We installed AQ-P100-4G for a certain educational institution. This photo helps to showcase the installation and pathways in the workspace.
An installation reference does not establish treatment performance or suitability for every use.
Learn more detailsAgree the details before ordering.
- 01
Define the operating point
Specify required flow and FAC together, source water, use pattern and country of installation.
- 02
Confirm the equipment package
Request the current datasheet, installation drawing, manual and a clear list of included options. Review available document references and their scope.
- 03
Agree acceptance and support
Agree flow, FAC and pH at one operating point, with source-water conditions and a sampling method. Define startup checks, operator training and the after-sales scope with Xiaoya.
A few details worth clarifying.
How should I plan daily production and cell replacement?
Share your required production hours and peak-use schedule. Confirm continuous-run limits and rest periods for this model before calculating daily capacity. Ask Xiaoya to define cell-life conditions and replacement terms separately from the equipment warranty.
Does “4G” mean remote control is included?
An optional industrial 4G IoT module uploads equipment data to the cloud through a cellular network, without a factory Ethernet or Wi-Fi connection. Monitor and operate equipment remotely through mobile or computer web apps. Confirm the supplied module, supported networks and service terms in your quotation.
Can the generator deliver 120 L/h at 80 ppm?
We can customize a hypochlorous acid generator for your operating conditions. Please contact our sales team with your requirements.
Is this the right model for a larger farm or factory?
That depends on peak demand, concentration and distribution. Compare the full generator range if your requirements exceed the confirmed operating point.
Turn the specification
into a proposal.
Share your application, required output and destination country.














