HCl-FED · CONFIGURATION COMPARISON

AQ-P300 Series
HOCl generators.

Three configurations. Compare output quality, cabinet dimensions and feed capacity around your project.

AQ-P300-A

Solution output
120–300 L/h
Available chlorine
10–200 ppm
pH range
5.0–6.5*
Feed tank
5 L
Rated power
420 W
Power supply
220 V / 50 Hz
Electrolyzer service life
≥5,000 h
Inlet pressure
0.15–0.25 MPa
Dimensions
500 × 510 × 1500 mm
Primary disinfecting factor
HClO
Electrode material
Ruthenium–iridium coated titanium

Still deciding? Ask us to recommend a configuration

Xiaoya AQ-P300-A, product brochure photograph
THE DIFFERENCES, SIDE BY SIDE

Compare your AQ-P300 configuration.

A and W share the listed output and concentration ranges. M has a different concentration range and feed-tank capacity. Cabinet dimensions differ across all three.

On smaller screens, swipe the table to see every configuration.

Xiaoya reference specifications · A, W and M
SpecificationAQ-P300-AAQ-P300-WAQ-P300-M
Solution output120–300 L/h120–300 L/h300 L/h
Available chlorine10–200 ppm10–200 ppm40–80 ppm
pH reference range5.0–6.5*5.0–6.5*5.0–6.5*
Feed tank capacity5 L5 L2 L
Unit weight//25 kg
Cabinet dimensions500 × 510 × 1500 mm390 × 340 × 910 mm420 × 280 × 625 mm
Rated power420 W420 W420 W
Reference supply220 V / 50 Hz220 V / 50 Hz220 V / 50 Hz
Reference inlet pressure0.15–0.25 MPa0.15–0.25 MPa0.15–0.25 MPa
Primary disinfecting factorHClOHClOHClO
Electrolytic cell service life≥5,000 h≥5,000 h≥5,000 h
Electrode materialRuthenium–iridium coated titaniumRuthenium–iridium coated titanium/
Discuss this modelEnquire: A Enquire: W Enquire: M
MATCH THE PROJECT

Start with the conditions
that matter to you.

01

Required solution quality

Share the available-chlorine concentration and outlet pH you need. The M reference lists 40–80 ppm; A and W list 10–200 ppm.

02

Output and operating schedule

Provide daily demand, peak use and running hours. We review the flow and concentration needed at the same operating point.

03

Installation and replenishment

Compare cabinet dimensions, access and feed-tank capacity. A larger tank does not establish a refill interval without operating and consumption data.

PREPARE FOR EVERYDAY USE

A clear installation.
A clear operating routine.

Before the equipment arrives

  • Water & pressure

    Provide your water information and available pressure. Outlet pH depends on water and operating conditions.

  • Power & location

    Confirm destination voltage, frequency, equipment access and service space before specifying the installation.

  • Feed & connections

    Agree the feed specification, replenishment procedure and any storage or delivery connections.

OPERATING HANDOVER

Keep the instructions
model-specific.

  1. Review startup and operating checks.
  2. Confirm feed preparation and replenishment.
  3. Agree the output-quality checks for your project.
  4. Review cleaning, maintenance and replacement parts.

Request the instructions for the supplied configuration. Interface details and maintenance steps should follow its approved documentation.

BEFORE YOU PLACE AN ORDER

Know what will be supplied.

Equipment specification

Confirm the selected model, operating point, electrical supply and agreed options.

Installation & operation

Review the layout, connections, operating guidance and customer-side requirements.

Inspection & documents

Discuss acceptance checks and the documents applicable to your configuration and destination.

Ask Xiaoya to include the relevant document list in your proposal. Review available document references and their scope.

Request configuration documents
FINAL QUESTIONS

Before you decide.

Can I calculate daily output from 300 L/h?

Confirm the chosen model’s flow and FAC together, plus permitted running hours and rest periods. Multiply the confirmed production rate by the agreed production hours; peak demand and storage must be reviewed separately.

Do A and W have the same performance?

Their reference output and concentration ranges match, but the cabinet dimensions differ. Confirm the operating point and configuration needed for your site.

Does M produce more than A or W?

The M reference lists 300 L/h, while A and W list 120–300 L/h. That does not establish M as a higher-output model; compare concentration and operating conditions too.

Can I choose from the cabinet picture alone?

Use the pictures to identify configurations. Confirm actual dimensions, mounting, connections and supplied options using the installation documents.

What if I do not know which model to choose?

Send your application, required volume, concentration if known, and destination. Select the AQ-P300 series enquiry option and discuss the configuration with Xiaoya.

Discuss your AQ-P300 project.

Choose a model above, or start with your requirements.

Help me choose a AQ-P300